SikaCeram 255 Grey Large Tile

535.0 INR/Bag

Get a Price/Quote

Product Details:

Application Layer thickness: 3mm (Minimum) Extended open time Reduced vertical slip Smooth application Typical bonding substrates: Cementitious screed, concrete, plaster, ceramic tiles, calcium sulphate screed, gypsum fibre boards
Usage All kinds of medium, large-sized tiles Ceramic Vitrified Glass mosaic Earthenware Porcelain Stoneware Terrazzo Unglazed Marble and natural stone
Installation Type The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 C and +35 C. Product declaration C2TE* according to EN 12004-1
Product Type BAG
Main Material Grey or White powder
Surface Treatment Polished
Weight 25 Kilograms (kg)
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

SikaCeram 255 Grey Large Tile Price And Quantity

Minimum Order Quantity 1 Bag
Price 535.0 INR/Bag

SikaCeram 255 Grey Large Tile Product Specifications

Main Material Grey or White powder
Usage All kinds of medium, large-sized tiles Ceramic Vitrified Glass mosaic Earthenware Porcelain Stoneware Terrazzo Unglazed Marble and natural stone
Weight 25 Kilograms (kg)
Installation Type The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 C and +35 C. Product declaration C2TE* according to EN 12004-1
Product Type BAG
Application Layer thickness: 3mm (Minimum) Extended open time Reduced vertical slip Smooth application Typical bonding substrates: Cementitious screed, concrete, plaster, ceramic tiles, calcium sulphate screed, gypsum fibre boards
Surface Treatment Polished

SikaCeram 255 Grey Large Tile Trade Information

FOB Port KOLKATA
Payment Terms Cash in Advance (CID)
Supply Ability 20 Bag Per Day
Delivery Time 2 Days
Sample Policy Within a certain price range free samples are available
Packaging Details 25 kg bag
Main Domestic Market East India Bihar Jharkhand Odisha West Bengal
Certifications (EN 12004-2 / ISO 13007-2)

Product Description

SikaCeram-255 Large Tile is a high performance cementitious

improved powdered, floor and wall adhesive

with no vertical slip and extended open time for

fixing large ceramic tiles, vitrified tiles, glass mosaic

and natural stone. For residential, industrial and commercial

wet and dry environments up to 10 mm thickness.

Indoor and outdoor use. EN 12004: Classification

C2TE* and IS 15477: 2019,Type 3 Adhesive

USES

Bonding the following types of tiles:

All kinds of medium, large-sized tiles

Ceramic

Vitrified

Glass mosaic

Earthenware

Porcelain

Stoneware

Terrazzo

Unglazed

Marble and natural stone

Bonding tiles for the following applications:

Balconies

Bathrooms

Commercial / Residential environments

Facades

Kitchens

Swimming pools

Terraces

Wet areas

Industrial floors

Heavy trafficked floors

Overlaying existing indoor sound ceramic tiles or

stones

Interior and exterior use

CHARACTERISTICS / ADVANTAGES

Layer thickness: 3mm (Minimum)

Extended open time

Reduced vertical slip

Smooth application

Typical bonding substrates: Cementitious screed,

concrete, plaster, ceramic tiles, calcium sulphate

screed, gypsum fibre boards

APPROVALS / STANDARDS

PRODUCT INFORMATION

Chemical base Portland cement, selected aggregates, water retention additives, re-dispersible

polymer

Packaging 25 kg bag

Appearance / Colour Grey or White powder

Shelf life 12 months from date of production

Storage conditions The product must be stored in original, unopened and undamaged sealed

packaging in dry conditions at temperatures between +5 C and +35 C.

Product declaration C2TE* according to EN 12004-1

1 / 4

C2TE* according to ISO 13007-1

IS 15477: 2019,Type 3 Adhesive

*Tensile adhesion strength test after freeze-thaw cycles not conducted due to tropical climatic conditions

TECHNICAL INFORMATION

Tensile adhesion strength Initial / dry condition 1.0 N/mm2

After water immersion /

wet condition

1.0 N/mm2

After heat ageing 1.0 N/mm2

After > 30 minutes, open

time

0.5 N/mm2

(EN 12004-2 /

ISO 13007-2)

Slip resistance 0.5 mm (EN 12004-2 / ISO 13007-2)

SYSTEM INFORMATION

System structure For the following substrates, a primer must be used:

Substrate Primer

Calcium sulphate substrate (gypsum,

gypsum fibre boards, calcium sulphate

screed)

SikaCeram-935 Floor Leveler

Primer diluted with water in ratio

1:1

APPLICATION INFORMATION

Fresh mor tar density Grey 1.70 0.20 kg/L (+27 C)

White 1.70 0.20 kg/L (+27 C)

(EN ISO 2811-1)

Consumption Consumption is dependent on the substrate, surface profile, roughness,

size of the tiles, the joints between them and application technique (i.e.

single spreading / floating method or double spreading / buttering method).

Apply product to a test area to calculate the exact consumption for

the specific substrate conditions and proposed application.

As a guide for a single adhesive layer:

Size of tiles Bed thickness Consumption

(Grey) dry

powder

Consumption

(White) dry

powder

Small 3 mm 2.503.00 kg/m2 2.753.25 kg/m2

Medium 4 mm 3.003.50 kg/m2 3.504.00 kg/m2

Large 5 mm 3.754.25 kg/m2 4.254.75 kg/m2

Ambient air temperature +5 C min. / +35 C max.

Mixing ratio Packing Water to powder ratio

by weight

Quantity of water per

bag

25 kg, Grey 0.250.28 6.257.00 L

25 kg, White 0.270.29 6.757.25 L

Substrate temperature +5 C min. / +35 C max.

Maturing time ~5 minutes

Pot life 180 minutes (100 g mass, +27 C)

Open time > 30 min (EN 12004-2 / ISO 13007-2)

Adjustability time ~40 min (+27 C)

Product Data Sheet

SikaCeram-255 Large Tile

October 2024, Version 02.02

021710102000000754

2 / 4

Applied product ready for use Use Waiting time

Grouting floors / walkability 2436 hours

Grouting walls 46 hours

Water immersion ~21 days

Values determined in laboratory conditions: +23 C 2 C, R.H. 50 % 5 %.

Higher temperatures will reduce the indicated waiting time, lower temperatures

increase waiting time.

BASIS OF PRODUCT DATA

All technical data stated in this Product Data Sheet are

based on laboratory tests. Actual measured data may

vary due to circumstances beyond our control.

ECOLOGY, HEALTH AND SAFETY

User must read the most recent corresponding Safety

Data Sheets (SDS) before using any products. The SDS

provides information and advice on the safe handling,

storage and disposal of chemical products and contains

physical, ecological, toxicological and other

safety-related data.

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY / PRE-TREATMENT

Important: Do not apply on metal surfaces and wood.

Important: Gypsum plaster and anhydrite screed substrates

must have a maximum moisture content of 0.5

The substrate can be one of the following materials:

Cementitious screed, concrete, plaster, ceramic tiles,

cement lime mor tars, calcium sulphate screed,

gypsum fibre boards.

Cementitious substrates must be sufficiently cured

and dried (26 weeks).

All substrates must be structurally sound, able to

support the weight of the new tiling and provide a

firm and securely fixed background.

Substrates must be clean, dry, free of any loose or

friable particles, contaminants such as dust, dirt, oil,

wax polish, grease, cement laitance or efflorescence.

Use adequate mechanical preparation techniques to

remove from the substrate, all traces of any materials

that could reduce the product's adhesion to the

substrate.

Smooth surfaces must be roughened lightly to improve

adhesion.

To confirm adequate surface preparation and adhesion,

carry out a small trial before full application.

Any small surface defects and variations in level, profile,

or around exposed aggregates, prefill and level

with an additional layer of SikaCeram-255 Large Tile

to a maximum thickness of 5 mm, applied at least 24

hours before full adhesive application.

For larger and thicker areas of substrate re-profiling

and making good, use suitable mort ars from the Sika

MonoTop or SikaCeram Floor Leveler range.

Identify cracks in the substrate and seal appropriately

with Sikadur epoxy resins.

When laying tiles on non-absorbent or substrates

with limited absorbency, such as existing ceramic

tiles, painted surfaces etc., check these surfaces are

all sound, firm and securely bonded. Use suitable degreasing

/ descaling products to thoroughly and completely

clean the substrate.

For applications in hot climates / environments, or

on absorbent substrates, thoroughly pre-dampen the

substrate immediately before product application.

Avoid any ponding / standing water on the substrate.

Surface must not be damp to touch.

If a waterproofing layer is required under the tiles,

cement-based and acrylic-based Sika waterproofing

product / systems must be applied to the substrate

before tiling.

MIXING

Important: Avoid over-mixing to minimise air entrainment.

Requirement: Use a low speed electric single paddle

mixer (< 500 rpm) with spiral paddle for mixing.

Pour the minimum recommended quantity of clean

cold water into a clean mixing container.

Gradually add SikaCeram-255 Large Tile powder to

the water while mixing.

Mix thoroughly for ~5 minutes until a uniformly coloured,

smooth mix is achieved. Add additional water,

if necessary, to the maximum specified amount.

Do not mix for ~5 minutes to allow mixed product to

mature.

5. Remix for ~15 seconds.

APPLICATION

Important: Apply sufficient adhesive to ensure adequate

wetting of the backs of the tiles.

Important: Coverage on the back of the tiles must be

100 %.

Important: Tiling must be carried out on freshly applied

adhesive. Exert adequate pressure to ensure 100

% complete and uniform contact with the adhesive to

achieve optimum adhesion.

Important: If a skin forms on the surface of the adhesive,

immediately remove the adhesive layer with a

trowel, discard material and apply a fresh layer of

SikaCeram-255 Large Tile adhesive.

Important: Protect freshly applied material from freezing

conditions and rain, etc.

Important: For natural stone tiles, always carry out a

preliminary test application first.

Note: On cementitious substrates, SikaCeram-255

Large Tile can be used for laying non-absorbent tiles

indoors up to 24 ft2 (e.g. 4 ft 6 ft). On walls up to 8 ft

height, non-heated floors and outdoor applications up

to 8 ft2 (e.g. 2 ft 4 ft).

Product Data Sheet

SikaCeram-255 Large Tile

October 2024, Version 02.02

021710102000000754

3 / 4

Note: For tiles > 900 cm2 (30 30 cm), the doublespreading

(buttering) technique is always recommended.

Apply sufficient adhesive to the prepared fixing surfaces

with the flat side of trowel.

Comb additional adhesive with appropriate square

notched trowel to the required bed thickness.

Wherever needed (for large tiles), back butter the

tiles for full bedding.

Place tiles into wet, sticky adhesive and use rubber

mallet to fully embed the tiles.

Adjust tiles if required. Provide support wherever

needed.

Clean off surplus adhesive from tile face and

between tile joints before the adhesive has dried.

CLEANING OF TOOLS

Clean all tools and application equipment with water

immediately after use. Hardened material can only be

mechanically removed.

LOCAL RESTRICTIONS

Note that as a result of specific local regulations the

declared data and recommended uses for this product

may vary from country to country. Consult the local

Product Data Sheet for exact product data and uses.

LEGAL NOTES

The information, and, in particular, the recommendations

relating to the application and end-use of Sika

products, are given in good faith based on Sika's current

knowledge and experience of the products when

properly stored, handled and applied under normal

conditions in accordance with Sika's recommendations.

In practice, the differences in materials, substrates

and actual site conditions are such that no warranty

in respect of merchantability or of fitness for a

particular purpose, nor any liability arising out of any

legal relationship whatsoever, can be inferred either

from this information, or from any written recommendations,

or from any other advice offered. The

user of the product must test the products suitability

for the intended application and purpose. Sika reserves

the right to change the properties of its

products. The proprietary rights of third parties must

be observed. All orders are accepted subject to our

current terms of sale and delivery. Users must always

refer to the most recent issue of the local Product

Data Sheet for the product concerne

Tell us about your requirement

Price:

Quantity *

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Floor Hardener' category

Sika Chapdur IN Price : 315.0 INR/Bag Minimum Order Quantity : 1 Surface Treatment : Relative Air Humidity 30% min. / 98% max. Substrate Temperature +5 C min. / +35 C max. Applied Product Ready for Use Foot Traffic Fully serviceable ~72 hours ~7 days The above values are at substrate temperature of +27 C and dependant upon the concrete reaching its design strength for serviceability and will be affected by changing ambient conditions, particularly temperature and relative humidity. Usage : The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. The compressive strength must be a minimum of 20 N/mm2. Use of Sikament or Sika Viscocrete super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners. Product Type : BAG Application : Consumption Application Product Consumption Light duty Sika Chapdur (IN) 3.5 4.0 kg/m2 Medium duty Sika Chapdur (IN) 4.5 5.0 kg/m2 Heavy duty Sika Chapdur (IN) 5.5 6.0 kg/m2 Purity : 1.5 0.1 kg/L at +27 C Size : 30 kg Bag Weight : 30 Kilograms (kg) Material Grade : Layer Thickness 2.5 3.0 mm at dosage of ~5.0 kg/m2 Ambient Air Temperature +5 C min. / +35 C max. Relative Air Humidity 30% min. / 98% max. Substrate Temperature +5 C min. / +35 C max. Main Material : Natural mineral aggregates graded and mixed with cement, admixtures and pigments Installation Type : Never add water to the surface where the dry shake has been applied. Sika Chapdur (IN) results in the slab surface becoming stiff more quickly than usual. Careful trimming must take place along the edges where adjoining slabs are to be poured. Periodical checking of the condition and development of the concrete will determine the correct time frame for each stage and sequence of application. For mechanical application with automatic spreader and laser screed, the spreading can start almost immediately after the concrete has been levelled to allow for the hydration of the dryshake. Compaction with the trowel can start as soon as the weight of the power trowels is supported by the concrete. For manual application, the dryshake must be spread once the concrete can be stepped on, without leaving a print deeper than 3 5 mm Feature : Consumption Application Product Consumption Light duty Sika Chapdur (IN) 3.5 4.0 kg/m2 Medium duty Sika Chapdur (IN) 4.5 5.0 kg/m2 Heavy duty Sika Chapdur (IN) 5.5 6.0 kg/m2

Send Inquiry

Sika Topseal 109 Hi Price : 5420.0 INR/Piece Minimum Order Quantity : 1 Surface Treatment : Polished Usage : The concrete substrate must be sound and with a minimum pull off strength of 1.5 N/mm2. The substrate must be free of all traces of contaminants, loose and friable particles, cement laitance, oils and grease, wax, curing compounds, water repellent coatings etc. The substrate must be prepared by suitable mechanical preparation techniques such as high pressure water jetting, needle guns, grinding, blast cleaning etc. High spots must be removed by grinding. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of blowholes/voids and surface levelling must be carried out using appropriate products from the Sikafloor , Sikadur and Sikagard range of materials. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum. Any wax based curing compounds or water repellent coatings must be fully removed by scraping or grinding. All intersections of horizontal and vertical surfaces should be profiled with a mor tar fillet of minimum 25 mm 25 mm Product Type : BAG Application : Consumption Layer Product Consumption Base coat SikaTop 109 Seal IN ~1 kg/m2 Top coat SikaTop 109 Seal IN ~1.2 kg/m2 Note: The consumption will vary depending on application area, substrate type, substrate roughness, surface profile, absorption of the surface and thickness required. Ambient air temperature +10 C min. / +40 C max. Mixing ratio Part A : Part B = 1 : 1.5 (by weight) Substrate temperature +10 C min. / +40 C max. Pot life ~40 minutes (100 g mass, +27 C) Purity : ~1.65 kg/L (Part A+B mixed, +27 C) Size : 50 Kg Pack Weight : 50 Kilograms (kg) Main Material : Waterproofing applications for various structures such as: Raw water concrete tanks, reservoirs, waste water tanks Terraces, balconies, sunshades, etc. Flat and small roofs Basement and Retaining walls Swimming pools, fountains, water bodies, canals RCC gutters, drains and planter boxes Wet areas like toilets, kitchen, utility, sunk slabs Lift pits, sump, etc. Interior and exterior waterproofing and dampproofing of concrete, cementitious rendering, brickwork and blockwork Protection of concrete structures against the effects of deicing salts and freezethaw attack Pore / blowhole filling Sealing fine static cracks in concrete structures not subject to movement Sealing internal basement walls against dampness

Send Inquiry

SikaRep Microconcrete 4 Price : 327.0 INR/Bag Minimum Order Quantity : 1 Surface Treatment : Polished Usage : No vibration needed Easily pumpable Easy to mix and apply Excellent flow characteristics Rapid strength development High ultimate strengths Impact resistant Noncorrosive Nontoxic Iron and chloride free Dense and nonshrink concrete created by dual stage expansion Good bonding with existing concrete Adjustable consistency by controlling the water within the recommended limit Product Type : BAG Application : SikaRep Microcrete4 is suitable for producing high performance microconcrete for deep repairs to all concrete structures such as: Highway bridges and culverts Whafts and jetties Tunnels and mines Dams and reservoirs Car parks and basements Power stations Sewerage and water treatment structures Anywhere where localised deep repair is required Anywhere additional thickness is required (column and beam jacketing, etc.) Structrural strengthening of structure by section enlargement Purity : Curing time Flexural strength 7 days 8 N/mm2 28 days 9 N/mm2 (ASTM C293) Values measured at water : powder = 0.15, curing temperature +30 C Size : 30 kg Weight : 30 Kilograms (kg) Material Grade : Portland cement, selected fillers and aggregates, special additives

Send Inquiry

Sikadur 42 HES In Price : 5350.0 INR/Piece Minimum Order Quantity : 1 Surface Treatment : Polished Usage : CONCRETE Concrete must be at least 28 days old. Substrates must be sound, clean, dry or matt damp but free of standing water. Substrates must be free of contaminants such as ice, dirt, oil, grease, coatings, laitance, efflorescence, surface treatments and loose friable material. Product Type : BAG Purity : Modulus of elasticity in compression ~14 000 N/mm2 (+30 C) (ASTM C579) Flexural strength ~40 N/mm2 (7 days, +30 C) (EN 196) Modulus of elasticity in flexure ~14 000 N/mm2 (+30 C) (ASTM C580) Tensile strength ~20 N/mm2 (7 days, +30 C) (ASTM D638) Tensile adhesion strength ~20 N/mm2 (Slant Shear Bond Strength at 30 C,7 days) (ASTM C882) ~2 N/mm2 (PullOff Bond Strength at 30 C,7 days) (EN 1542) Heat deflection temperature +54 C (7 days, +30 C) (ASTM D648) Shrinkage Very low Coefficient of thermal expansion 1.9 105/K (ASTM D696) Water absorption ~0.05 % (ASTM D570) Weight : 26.500 Kilograms (kg) Installation Type : High early strength Readytomix, prebatched units Good flowability Tolerant to substrates with high moisture content Good mechanical resistance Very low shrinkage Low coefficient of thermal expansion Good creep resistance Good resistance to vibration High reactivity for low temperature application (+10 C) Impermeable to most liquids and water vapour Feature : The Product is used for sleeperless, direct rail fixing: Crane tracks Light rail and permanent way in tunnels Light rail and permanent way over bridges The Product is used for repairing the following concrete elements: Spalled concrete structures Industrial floor slabs Hole and void filling Runways Hardstandings Car park decks The Product is used for interior and exterior applications.

Send Inquiry

SEND INQUIRY CALL ME FREE

BRP ADHIKARY CHEMICALS PRIVATE LIMITEDGST : 19AAJCB0019N1ZJ

SikaCeram 255 Grey Large Tile

Product Details:

SikaCeram 255 Grey Large Tile Price And Quantity

SikaCeram 255 Grey Large Tile Product Specifications

SikaCeram 255 Grey Large Tile Trade Information

Product Description

Other Products in 'Floor Hardener' category

BRP ADHIKARY CHEMICALS PRIVATE LIMITED
GST : 19AAJCB0019N1ZJ