Sika Grout 214 IN S

312.0 INR/Bag

Get a Price/Quote

Product Details:

Usage To grout bearings, machine foundations, columns joints in precast construction etc. To grout anchors in concrete To grout cavities, gaps and voids in concrete To grout base plate of turbine, compressor, boilers, pumps and heavy machinery. Sealing around penetrations Post fixings
Features Compressive Strength 1 day 25 N/mm2 3 days 35 N/mm2 7 days 45 N/mm2 28 days 65 N/mm2 (ASTM C109) 70.6 mm cube, ambient temperature +30 C Tensile Strength in Flexure 7 days, +30 C ~9 N/mm2 28 days, +30 C ~10 N/mm2 (ASTM C293) Splitting tensile strength 3.5 N/mm2 (28 days, +35 C) (ASTM C496) Pull-Out Resistance 7 days ~19 MPa 28 days ~20 MPa
Installation Type The substrate shall be thoroughly clean, free from dust, loose material, surface contamination and materials which reduce bond or prevent suction or wetting by the grout. Delaminated, weak, damaged and deteriorated concrete and where necessary sound concrete shall be removed by suitable means.The concrete pull off tensile strength should be 1.0 MPa. The concrete substrates should be pre-soaked with clean water continuously for 2 6 hours to ensure a saturated surface dry condition throughout the operation. Immediately before pouring grout remove all excess or standing water from within any formwork
Application Mixing Ratio Flowable Water : Powder = 0.15 0.16 by weight 4.5 4.8 litres water per 30 kg bag Pourable Water : Powder = 0.14 by weight 4.2 litres water per 30 kg bag
Purity .3.5 N/mm2
Material Grade 1.15 1.60 kg/L (dry powder density) at +27 C
Product Type BAG
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Sika Grout 214 IN S Price And Quantity

Price 312.0 INR/Bag
Minimum Order Quantity 1 Bag

Sika Grout 214 IN S Product Specifications

Material Grade 1.15 1.60 kg/L (dry powder density) at +27 C
Purity .3.5 N/mm2
Feature SikaGrout -214 IN S is a cement based 1-component, ready to mix, non-shrink, ready to use, pourable and flowable, expanding engineering grout in dry powder form. It is widely used for precision grouting in engineering objects subjected to static and dynamic loads.
Surface Treatment Polished
Shape Compressive Strength 1 day 25 N/mm2 3 days 35 N/mm2 7 days 45 N/mm2 28 days 65 N/mm2
Application Mixing Ratio Flowable Water : Powder = 0.15 0.16 by weight 4.5 4.8 litres water per 30 kg bag Pourable Water : Powder = 0.14 by weight 4.2 litres water per 30 kg bag
Main Material Cement, special additives, and aggregates
Installation Type The substrate shall be thoroughly clean, free from dust, loose material, surface contamination and materials which reduce bond or prevent suction or wetting by the grout. Delaminated, weak, damaged and deteriorated concrete and where necessary sound concrete shall be removed by suitable means.The concrete pull off tensile strength should be 1.0 MPa. The concrete substrates should be pre-soaked with clean water continuously for 2 6 hours to ensure a saturated surface dry condition throughout the operation. Immediately before pouring grout remove all excess or standing water from within any formwork
Weight 30 Kilograms (kg)
Product Type BAG
Size 30Kg Bag
Features Compressive Strength 1 day 25 N/mm2 3 days 35 N/mm2 7 days 45 N/mm2 28 days 65 N/mm2 (ASTM C109) 70.6 mm cube, ambient temperature +30 C Tensile Strength in Flexure 7 days, +30 C ~9 N/mm2 28 days, +30 C ~10 N/mm2 (ASTM C293) Splitting tensile strength 3.5 N/mm2 (28 days, +35 C) (ASTM C496) Pull-Out Resistance 7 days ~19 MPa 28 days ~20 MPa
Usage To grout bearings, machine foundations, columns joints in precast construction etc. To grout anchors in concrete To grout cavities, gaps and voids in concrete To grout base plate of turbine, compressor, boilers, pumps and heavy machinery. Sealing around penetrations Post fixings

Sika Grout 214 IN S Trade Information

FOB Port KOLKATA
Payment Terms Cash in Advance (CID)
Supply Ability 200 Bag Per Day
Delivery Time 2 Days
Sample Policy Within a certain price range free samples are available
Packaging Details 30 KG BAG
Main Domestic Market East India Bihar Jharkhand Odisha West Bengal
Certifications SIKA

Product Description

DESCRIPTION

SikaGrout-214 IN S is a cement based 1-component,

ready to mix, non-shrink, ready to use, pourable and

flowable, expanding engineering grout in dry powder

form. It is widely used for precision grouting in engineering

objects subjected to static and dynamic loads.

USES

To grout bearings, machine foundations, columns

joints in precast construction etc.

To grout anchors in concrete

To grout cavities, gaps and voids in concrete

To grout base plate of turbine, compressor, boilers,

pumps and heavy machinery.

Sealing around penetrations

Post fixings

CHARACTERISTICS / ADVANTAGES

Easy to use, ready to mix powder

Easy to mix, only add water

Adjustable consistency

Very good flow characteristics

Rapid strength development

High final strengths

Initial expansion by gas generation

Impact and vibration resistant

Non-corrosive

Not flammable

Non-toxic

Shrinkage compensated

Expansive to counteract initial shrinkage

PRODUCT INFORMATION

Chemical Base Cement, special additives, and aggregates

Packaging 30 kg bag

Appearance / Colour Grey powder

Shelf Life 6 months from date of production

Storage Conditions Store properly in dry conditions in undamaged and unopened original

sealed packaging.

Bulk Density 1.151.60 kg/L (dry powder density) at +27 C (ASTM C948)

Maximum Grain Size 2.36 mm

Product Declaration ASTM C1107

1 / 3

TECHNICAL INFORMATION

Compressive Strength 1 day 25 N/mm2

3 days 35 N/mm2

7 days 45 N/mm2

28 days 65 N/mm2

(ASTM C109)

70.6 mm cube, ambient temperature +30 C

Tensile Strength in Flexure 7 days, +30 C ~9 N/mm2

28 days, +30 C ~10 N/mm2

(ASTM C293)

Splitting tensile strength 3.5 N/mm2 (28 days, +35 C) (ASTM C496)

Pull-Out Resistance 7 days ~19 MPa

28 days ~20 MPa

This is also referred as Pull out bond strength.

Tensile Adhesion Strength ~1.5 N/mm2 (28 days, +35 C) (EN 1542)

Shrinkage No shrinkage after initial setting

Expansion Upto 4 % (ASTM C1090)

APPLICATION INFORMATION

Mixing Ratio Flowable Water : Powder =

0.150.16 by weight

4.54.8 litres water per

30 kg bag

Pourable Water : Powder = 0.14

by weight

4.2 litres water per 30

kg bag

Fresh mor tar density 20002300 kg/m3

Consumption ~1950 kg/m3 at water to powder ratio 0.15

Layer Thickness 100 mm max.

Ambient Air Temperature +5 C min. / +40 C max.

Substrate Temperature +5 C min. / +40 C max.

Pot Life ~20 minutes at +30 C (FIP 5.1)

Initial Set Time ~30 minutes

BASIS OF PRODUCT DATA

All technical data stated in this Product Data Sheet are

based on laboratory tests. Actual measured data may

vary due to circumstances beyond our control.

ECOLOGY, HEALTH AND SAFETY

For information and advice on the safe handling, storage

and disposal of chemical products, users shall

refer to the most recent Safety Data Sheet (SDS) containing

physical, ecological, toxicological and other

safety-related data.

LIMITATIONS

Use SikaGrout-214 IN S for grouting only, do not

use SikaGrout-214 IN S for patch repair work or

overlay in unconfined spaces etc.

Ensure formwork is secure and watertight to prevent

movement and leaking during placing and curing.

Use chilled water for mixing in case of high ambient

temperature. Use hot water for mixing in case of

very low ambient temperature.

Depending on requirements and site conditions the

addition of dry, single size and clean aggregates is

possible. Trials are recommended to confirm suitability

of aggregates to be used.

For large bedding holes and higher gaps, duly

washed coarse aggregates of size 6 mm down may

be mixed with SikaGrout-214 IN S in the proportion

of grout : aggregate= 2 : 1 (by weight).

Avoid application in direct sun and/or strong wind

Do not add water under or over recommended

dosage.

Apply only to sound, prepared substrate.

Do not add additional water during the surface finishing

as this may cause discolouration and cracking.

Protect freshly applied material from freezing a

Tell us about your requirement

Price:

Quantity *

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Ready to Mix' category

Sika Viscocrete 718 X Price : 32450.0 INR/Barrel Minimum Order Quantity : 1 Usage : Sika ViscoCrete 718 X is specially suitable for the production of concrete mixes which require high strength development, powerful water reduction and excellent flowability Sika ViscoCrete 718 X is mainly used for the following applications: Ready mixed concrete Pumped concrete In situ concrete Self Compacting Concrete (SCC) Product Type : BAG Surface Treatment : Polished Purity : ~1.11 kg/l at 25 C Application : Sika ViscoCrete 718 X as a powerful water reducer acts by through surface adsorption and sterical effects separating the binder particles the following properties are achieved: Extremely powerful water reduction, resulting in high density, high strength and reduced permeability for water etc. Excellent plasticizing effect resulting in improved flowability, placing and compacting behaviour Suitable for the production of Self Compacting Concrete (SCC) Improved shrinkage and creep behavior It does not contain chlorides or other ingredients promoting corrosion of steel reinforcement. Weight : 255 Kilograms (kg) Size : 255 Kg Installation Type : Optimum dosage of Sika ViscoCrete 718 X should be determined by site trials. Recommended dosage: 0.2 2.0% by weight of cementitious. A higher dosage might be used if agreed by client or consultant. Stir well before use.

Send Inquiry

SikaPlast 3069 NS Price : 14000.0 INR/Barrel Minimum Order Quantity : 1 Usage : SikaPlast 3069 NS a plasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls and columns and other structural and non structural elements. Specially recommended for the following types of concrete: Ready mixed concrete Pumped concrete Site batched concrete PQC concrete Product Type : BAG Surface Treatment : Polished Purity : ~ 1.04 kg/l at 25 C Weight : 230 Kilograms (kg) Size : 230KG Main Material : Modified Polycarboxylates Feature : SikaPlast 3069 NS Imparts good workability, workability retention and allows decrease in water content

Send Inquiry

SikaPlast 5202 NS Price : 15550.0 INR/Barrel Minimum Order Quantity : 1 Usage : Recommended Dosage 0.5% to 2.0% by weight of cementitious. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast 5202 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials. Product Type : BAG Surface Treatment : Polished Purity : ~ 1.08 kg/l at 25 C Application : Recommended Dosage 0.5% to 2.0% by weight of cementitious. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast 5202 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials Weight : 256 Kilograms (kg) Main Material : Dark Brown Liquid Feature : SikaPlast 5202 NS is a powerful superplasticiser based on advanced technology which gives the following advantages: Strong water reduction, resulting in high density, high strength and reduced permeability Less sensitive against variations in aggregates and / or different cement types High efficiency even at low dosage rates Extended workability in conjunction with subsequent strength development Superior plasticising effect, resulting in improved flow, placing and compaction characteristics Reduced shrinkage during curing and reduced creep when hardened Provides many opportunities for cost improvement

Send Inquiry

SikaPlast 4201 NS Price : 19000.0 INR/Barrel Minimum Order Quantity : 1 Usage : SikaPlast 4201 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast 4201 NS is used for the following: A wide range of applications where excellent workability is required Concrete with high water reduction High efficient concrete applications Variable use in different concrete systems with different raw materials Product Type : BAG Surface Treatment : Polished Purity : ~1.05 kg/l at 25 C Application : Recommended Dosage 0.5 % to 2.0 b. w. o. c. Optimum dosage has to be finalized through site trials. And also if any Air entraining admixture is used separately then the dosage should be adjusted by site trial. Stir well before use. Compatibility SikaPlast 4201 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials. Weight : 255 Kilograms (kg) Size : 255 kg Main Material : Admixture Group

Send Inquiry

SEND INQUIRY CALL ME FREE

BRP ADHIKARY CHEMICALS PRIVATE LIMITEDGST : 19AAJCB0019N1ZJ

Sika Grout 214 IN S

Product Details:

Sika Grout 214 IN S Price And Quantity

Sika Grout 214 IN S Product Specifications

Sika Grout 214 IN S Trade Information

Product Description

Other Products in 'Ready to Mix' category

BRP ADHIKARY CHEMICALS PRIVATE LIMITED
GST : 19AAJCB0019N1ZJ