Ready To MixManufacturer ,Ready To Mix Supplier

Sika Grout 214 IN S

Supply Ability:200 Per Day
Application:Mixing Ratio Flowable Water : Powder = 0.15 0.16 by weight 4.5 4.8 litres water per 30 kg bag Pourable Water : Powder = 0.14 by weight 4.2 litres water per 30 kg bag
Shape:Compressive Strength 1 day 25 N/mm2 3 days 35 N/mm2 7 days 45 N/mm2 28 days 65 N/mm2
Weight:30 Kilograms (kg)
Installation Type:The substrate shall be thoroughly clean, free from dust, loose material, surface contamination and materials which reduce bond or prevent suction or wetting by the grout. Delaminated, weak, damaged and deteriorated concrete and where necessary sound concrete shall be removed by suitable means.The concrete pull off tensile strength should be 1.0 MPa. The concrete substrates should be pre-soaked with clean water continuously for 2 6 hours to ensure a saturated surface dry condition throughout the operation. Immediately before pouring grout remove all excess or standing water from within any formwork
Features:Compressive Strength 1 day 25 N/mm2 3 days 35 N/mm2 7 days 45 N/mm2 28 days 65 N/mm2 (ASTM C109) 70.6 mm cube, ambient temperature +30 C Tensile Strength in Flexure 7 days, +30 C ~9 N/mm2 28 days, +30 C ~10 N/mm2 (ASTM C293) Splitting tensile strength 3.5 N/mm2 (28 days, +35 C) (ASTM C496) Pull-Out Resistance 7 days ~19 MPa 28 days ~20 MPa
Material Grade:1.15 1.60 kg/L (dry powder density) at +27 C
Size:30Kg Bag

Price: 312.0 INR/Bag

Send Inquiry

SikaPlast 4201 NS

Size:255 kg
Application:Recommended Dosage 0.5 % to 2.0 b. w. o. c. Optimum dosage has to be finalized through site trials. And also if any Air entraining admixture is used separately then the dosage should be adjusted by site trial. Stir well before use. Compatibility SikaPlast -4201 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials.
Weight:255 Kilograms (kg)
Surface Treatment:Polished
Usage:SikaPlast -4201 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast - 4201 NS is used for the following: A wide range of applications where excellent workability is required Concrete with high water reduction High efficient concrete applications Variable use in different concrete systems with different raw materials
Main Material:Admixture Group
Purity:~1.05 kg/l at 25 C
Supply Ability:20 Per Day

Price: 19000.0 INR/Barrel

Send Inquiry

Sikament 2004 NS

Supply Ability:20 Per Day
Feature:Superior Quality
Usage:Construction
Product Type:BAG
Weight:275 Kilograms (kg)
Size:275 kg Barrel
Form:Liquid
Surface Treatment:Polished

Price: 11800.0 INR/Barrel

Send Inquiry

Sika Separol N Oil Based Shutter Release Agent

Supply Ability:20 Per Day
Usage:Form release agent on absorbent and non-absorbent formwork Providing a good quality aesthetic finish on cast and pre-cast concrete Extending the life of formwork
Purity:~0,90 kg/l ( 0,05 kg/l)
Product Type:BAG
Main Material:Wooden formwork ~15 22 m2/L Metal or plastic formwork ~31 60 m2/L
Weight:230 Kilograms (kg)
Surface Treatment:Polished
Size:Barrel

Price: 34400.0 INR/Barrel

Send Inquiry

SikaPlast 2004 NS

Supply Ability:20 Per Day
Main Material:Modified Polycarboxylate
Product Type:BAG
Purity:~1.08 kg/l at 25 C
Usage:SikaPlast -2004 NS can be added into the mixing water or directly into the concrete mixer after 50 70% of the mixing water has been added. The addition of SikaPlast -2004 NS to dry aggregate or cement is not recommended. To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended. LIMITATIONS Excessive water addition or overdosing may cause bleeding or segregation. Overdosing may cause extension of initial and final setting times. If frozen and / or if precipitation has occurred, SikaPlast -2004 NS may be used after thawing slowly at room temperature and after intensive mixing. BASIS OF PRODUCT DATA All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
Surface Treatment:Polished
Application:SikaPlast -2004 NS can be added into the mixing water or directly into the concrete mixer after 50 70% of the mixing water has been added. The addition of SikaPlast -2004 NS to dry aggregate or cement is not recommended. To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended.
Weight:255 Kilograms (kg)

Price: 21300.0 INR/Barrel

Send Inquiry

Sika Grout 214 IN

Size:30 Kg Bag
Main Material:ASTM C1107
Product Type:BAG
Purity:Dmax: 2.36 mm
Usage:Dual shrinkage compensated Suitable for temperature of above 0 C up to +200 C Easy to mix, only add water Adjustable consistency Very good flow characteristics Rapid strength development Excellent bond to concrete No segregation or bleeding High final strengths Initial expansion by gas generation Impact and vibration resistant Non-corrosive to anchor bolts, base plate / saddle / frame, sliding plate Not harmful to concrete and reinforcing steel Not flammable Non-toxic Frost, oil and fire resistant Require normal curing Suitable to use under restraints and grout thickness required Expansive to counteract initial shrinkage Maximum flow distance is compatible to the dimensions of base plate / saddle / frame Resistant to the chemicals, gases etc. being handled in equipment Chloride free
Feature:Flexural strength Curing time Flexural strength 7 days ~9 N/mm2 28 days ~10 N/mm2
Surface Treatment:Polished
Supply Ability:200 Per Day

Price: 370.0 INR/Bag

Send Inquiry

SikaPlast 100 FFT-VC

Surface Treatment:Polished
Application:SikaPlast -100 FFT VC offers substantial benefits to the precast and semi dry precast concrete producers: Efficient dispersion and distribution of cement, additives and pigments Improved movement of the concrete through the machine Accelerated hardening and high early strength Early de moulding No adverse effect on ultimate strength Sufficient water reduction Improved surface finish Improved water tightness More economic concrete mix designs
Size:230
Main Material:Admixture
Product Type:BAG
Purity:~1.01 kg/l at 25 C
Usage:SikaPlast -100 FFT VC is suitable for concreting of the following applications: Precast and Pre stressed concrete elements Block paving (grey/coloured) Cement tiles (grey/coloured) Paving flags Kerb stones Edging and other items for garden and landscape design Building blocks and bricks
Supply Ability:20 Per Day

Price: 13300.0 INR/Barrel

Send Inquiry

Sika Viscocrete 20 HE

Supply Ability:20 Per Day
Purity:~1,09 kg/l at +20 C
Product Type:BAG
Main Material:Sika ViscoCrete -20 HE is a liquid admixture for concrete and mort ar which is used as high range water reducer or superplasticiser. Sika ViscoCrete -20 HE is designed to work on a combination of electrostatic adsorption and steric repulsion effects allowing solid particles to be effectively dispersed. Therefore a high level of fluidity and plasticising can be reached with a high water reduction which provides many advantages.
Usage:High water reduction High final density and strength properties Reduced shrinkage, creep, water permeability, etc Improved flowability, placing and compacting behaviour Improved surface finish Increased early strength development Early removal of formwork Reduced curing Does not contain chlorides Suitable for use in reinforced and pre-stressed concrete
Surface Treatment:Polished
Weight:255 Kilograms (kg)
Application:Production of concrete mixes which require high early strength development, powerful water reduction and improved flowability. Precast concrete Fast-track concrete In situ concrete requiring fast stripping time Self Compacting Concrete (SCC)

Price: 32850.0 INR/Barrel

Send Inquiry

Sika Ceram 50 Tilofix

Supply Ability:20 Per Day
Application:Sika provides a full range of system solution in Tile setting. Please refer to Building Finishing user manual to choose right products from SikaCeram tile adhesives, SikaCeram cementitious tile grouts, SikaCeram epoxy tile grouts, SikaCeram floor leveler for usage in different applications.
Size:20 kg , 40 kg
Product Type:BAG
Purity:0.5 N/mm2
Main Material:Bonding the following types of tiles for floor and wall: Ceramic Earthenware Bonding the following types of tiles for floor: Vitrified
Usage:Surfaces shall be clean, dry, free of any loose or friable particles, contaminants such as dust, dirt, oil, wax, polish grease, cement laitance or efflorescence. Use adequate preparation techniques to remove all traces of any materials that could reduce the product's adhesion to the substrate. Smooth surfaces should be roughened lightly to improve adhesion. To confirm adequate surface preparation and coating adhesion, carry out a small trial before full application. Any small surface defects and variations in level, profile, or around exposed aggregates can be prefilled and levelled with an additional layer of SikaCeram - 50 Tilofix to a maximum thickness of 5 mm, applied at least 24 hrs before full adhesive application. For larger and thicker areas of surface reprofiling and making good, use appropriate mortars from the Sika MonoTop or SikaCeram Floor Leveler range. Identify cracks in substrates and seal appropriately with Sikadur epoxy resins. For applications in hot climates / environments, or on absorbent substrates, thoroughly pre-dampen the surface immediately prior to product application. Avoid any ponding / standing water on the surface. Surface must not be damp to touch. If a waterproofing layer is required, cement-based and acrylic-based Sika waterproofing product / system must be applied to the substrate before tiling.
Surface Treatment:Polished

Price: 225.0 INR/Bag

Send Inquiry

Sika Plastocrete Plus

Weight:230 Kilograms (kg)
Installation Type:Sika Plastocrete Plus liquid should be dispensed directly into the mixing water, prior to its addition to the aggregates
Features:Recommended Dosage 0.05 0.2% by weight of cement. Actual dosage to be finalised on the basis of site trials.
Material Grade:pH-Value 6
Application:IS 2645, IS 9103
Shape:230 Kg Barrel
Surface Treatment:Polished
Supply Ability:20 Per Day

Price: 11400.0 INR/Barrel

Send Inquiry

Sika Viscocrete 2004 NS

Supply Ability:20 Per Day
Features:Sika ViscoCrete -2004 NS may be combined with many other Sika Products. Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information about specific combinations. Compatible with all types of cement and cementitious materials.
Material Grade:~1.12 kg/l at 25 C
Weight:255 Drams (dr)
Installation Type:Sika ViscoCrete -2004 NS can be added into the mixing water or directly into the concrete mixer after 50 70% of the mixing water has been added. The addition of Sika ViscoCrete -2004 NS to dry aggregate or cement is not recommended. To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended
Shape:Brown Liquid
Application:Optimum dosage of Sika ViscoCrete -2004 NS should be determined by site trials. Recommended dosage: 0.2 2.0% by weight of cementitious. A higher dosage might be used if agreed by client or consultant.Stir well before use.
Feature:12 months from date of production if stored properly in undamaged unopened, original sealed packaging.

Price: 32800.0 INR/Barrel

Send Inquiry

Sika Polysulphide Pour Grade

Usage:SUBSTRATE PREPARATION All surfaces must be clean, dry and free from any loosely adhering particles. Check the joints edges for soundness and if found weak cut recess and fill up with suitable repair mort ar (Consult Sika Technical services). Correct joint depth can be established by inserting polyethylene based Sika Backer Materia,glass rod,etcl tightly into the joint. When the joints have been filled with fibre filled board, this must be raked back to the required depth. Use bond breaker tape over the backer material. Protect surfaces with masking tape. Sika Primer 3 IN/Sika Primer 3 should be used as a primer only on the two sides. Allow a flash-off time
Purity:1.6 -1.75 kg/litre at 30 C
Product Type:BAG
Main Material:Sika Polysulphide, Pour Grade is a two component Polysulphide sealant. It is used for sealing expansion joints where large movement is anticipated in concrete construction and for joints between diverse construction materials. It is suitable for sealing joints subjected to vehicular traffic and is chemically resistant to water, fuels, oils and solvents.
Weight:4 Kilograms (kg)
Surface Treatment:Polished
Supply Ability:20 Per Day

Price: 1325 INR/Piece

Send Inquiry

Sika Lastic 520 Cool Coat

Supply Ability:20 Per Day
Installation Type:The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. The compressive strength must be a minimum of 20 N/mm2. Use of Sikament or Sika Viscocrete super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners.
Application:The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. The compressive strength must be a minimum of 20 N/mm2. Use of Sikament or Sika Viscocrete super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners.
Surface Treatment:Polished
Weight:30 Kilograms (kg)
Purity:Abrasion Resistance ~1.70 mm wear loss (IS:1237) Surface hardness Between 8 and 9 (Moh's scale) (IS:13630 Part 13) Compressive Strength 70 N/mm2 (IS:4031 Part 6)
Product Type:BAG
Main Material:Sika Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: Warehouses Factories Shopping malls Public areas Restaurants Museums Parking lots Garages and Service stations

Price: 2250.0 INR/Piece

Send Inquiry

Sika Antisol E WP

Weight:230 Kilograms (kg)
Application:0.10 to 0.20 kg/m2 depending on wind, humidity and temperature. Actual dosage to be finalised on the basis of site trials.
Surface Treatment:Polished
Usage:SUBSTRATE QUALITY / PRE-TREATMENT Substarte must be free from water, oil and stains. APPLICATION Stir well Sika Antisol E (WP) before application. Apply uniformly on to the newly laid concrete as soon as the surface water evaporates. Apply preferably using low pressure sprayer uniformly on concrete surface. Brush/Roller application could consume more Sika Antisol E (WP) due to the very nature of the application.
Product Type:BAG
Purity:0.99 - 1.02 kg/l at 25 C
Main Material:White lump free liquid
Supply Ability:20 Per Day

Price: 17100.0 INR/Barrel

Send Inquiry

SikaPlast 5061 NS

Supply Ability:20 Per Day
Surface Treatment:Polished
Weight:255 Kilograms (kg)
Product Type:BAG
Main Material:Light Brown Liquid
Feature:SikaPlast -5061 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.
Usage:SikaPlast -5061 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast 5061 NS is used for the following: A wide range of applications where excellent workability is requested Concrete with high water reduction High efficient concrete applications
Application:Recommended Dosage 0.5% to 2.0% by weight of cementitious. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast -5061 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials.

Price: 16205 INR/Barrel

Send Inquiry

Sika Viscocrete 718 X

Purity:~1.11 kg/l at 25 C
Product Type:BAG
Material Grade:Aqueous solution of modified poly carboxylate
Features:12 months from date of production if stored properly in undamaged unopened, original sealed packaging. Storage conditions Store in dry conditions at temperatures between +10 C and +40 C. Protect from direct sunlight and frost. Density ~1.11 kg/l at 25 C
Usage:Sika ViscoCrete -718 X is specially suitable for the production of concrete mixes which require high strength development, powerful water reduction and excellent flowability Sika ViscoCrete -718 X is mainly used for the following applications: Ready mixed concrete Pumped concrete In situ concrete Self Compacting Concrete (SCC)
Installation Type:Optimum dosage of Sika ViscoCrete -718 X should be determined by site trials. Recommended dosage: 0.2 2.0% by weight of cementitious. A higher dosage might be used if agreed by client or consultant. Stir well before use.
Surface Treatment:Polished
Supply Ability:20 Per Day

Price: 32450.0 INR/Barrel

Send Inquiry

SikaPlast 4111 Ns

Supply Ability:20 Per Day
Usage:SikaPlast -4111 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast - 4111 NS is used for the following: A wide range of applications where excellent workability is requested Concrete with high water reduction High efficient concrete applications Variable use in different concrete systems with different raw materials
Product Type:BAG
Main Material:Brown Liquid
Weight:255 Kilograms (kg)
Surface Treatment:Polished
Size:255 Kg
Application:Recommended Dosage 0.2% to 2.0% by weight of cement. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast -4111 NS may be combined with many other Sika products. Compatible with all types of cement and cementitious materials. Important: Always conduct trials before combining products in specific mixes and combinations.

Price: 16250.0 INR/Barrel

Send Inquiry

SikaPlast 5202 NS

Surface Treatment:Polished
Application:Recommended Dosage 0.5% to 2.0% by weight of cementitious. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast -5202 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials
Weight:256 Kilograms (kg)
Main Material:Dark Brown Liquid
Product Type:BAG
Purity:~ 1.08 kg/l at 25 C
Usage:Recommended Dosage 0.5% to 2.0% by weight of cementitious. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast -5202 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials.
Supply Ability:20 Per Day

Price: 15550.0 INR/Barrel

Send Inquiry

Sikament 2014 NS

Size:275 kg Barrel
Weight:275 Kilograms (kg)
Surface Treatment:Polished
Application:Admixture
Product Type:BAG
Supply Ability:20 Per Day

Price: 11800.0 INR/Barrel

Send Inquiry

SikaPlast 3001 NS

Supply Ability:20 Per Day
Application:SikaPlast -3001 NS can be added into the mixing water or directly into the concrete mixer after 50 70% of the mixing water has been added. The addition of SikaPlast -3001 NS to dry aggregate or cement is not recommended. To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended.
Installation Type:DISPENSING SikaPlast -3001 NS can be added into the mixing water or directly into the concrete mixer after 50 70% of the mixing water has been added. The addition of SikaPlast -3001 NS to dry aggregate or cement is not recommended. To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended
Surface Treatment:Polished
Product Type:BAG
Purity:~1.09 kg/l at 25 C
Main Material:Modified Polycarboxylate
Feature:Recommended Dosage 0.5% to 2.0% by weight of cementitious. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast -3001 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials

Price: 21500.0 INR/Barrel

Send Inquiry

SikaPlast 5003 NS

Purity:~1.11 kg/l at 25 C
Product Type:BAG
Material Grade:Store in dry conditions at temperatures between +10 C and +40 C. Protect from direct sunlight and frost.
Main Material:Light Brown Liquid
Usage:SikaPlast 5003 NS is a powerful superplasticiser based on advanced technology which gives the following advantages: Strong water reduction, resulting in high density, high strength and reduced permeability Less sensitive against variations in aggregates and / or different cement types High efficiency even at low dosage rates Extended workability in conjunction with subsequent strength development Superior plasticising effect, resulting in improved flow, placing and compaction characteristics
Surface Treatment:Polished
Weight:255 Kilograms (kg)
Supply Ability:20 Per Day

Price: 22000.0 INR/Barrel

Send Inquiry

SikaPlast 4231 NS

Main Material:Modified Polycarboxylate
Purity:~1.06 kg/l at 25 C
Product Type:BAG
Usage:SikaPlast -4231 NS is a unique multipurpose superplasticiser that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast - 4231 NS is used for the following: A wide range of applications where excellent workability is required Concrete with high water reduction High efficient concrete applications Variable use in different concrete systems with different raw materials
Feature:Recommended Dosage 0.5 % to 2.0 b. w. o. c. Optimum dosage has to be finalized through site. Stir well before use. Compatibility SikaPlast -4231 NS may be combined with many other Sika products. Compatible with all types of cement and cementitious materials. Important: Always conduct trials before combining products in specific mixes and combinations.
Surface Treatment:Polished
Application:SikaPlast -4231 NS is a powerful superplasticiser based on advanced technology which gives the following advantages: Strong water reduction, resulting in high density, high strength and reduced Permeability Less sensitive against variations in aggregates and / or different cement types High efficiency even at low dosage rates Extended workability in conjunction with subsequent strength development Superior plasticising effect, resulting in improved flow, placing and compaction Characteristics
Supply Ability:20 Per Day

Price: 18000.0 INR/Barrel

Send Inquiry

SikaPlast 3069 NS

Supply Ability:20 Per Day
Size:230KG
Usage:SikaPlast -3069 NS a plasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls and columns and other structural and non structural elements. Specially recommended for the following types of concrete: Ready mixed concrete Pumped concrete Site batched concrete PQC concrete
Feature:SikaPlast 3069 NS Imparts good workability, workability retention and allows decrease in water content
Main Material:Modified Polycarboxylates
Product Type:BAG
Purity:~ 1.04 kg/l at 25 C
Weight:230 Kilograms (kg)

Price: 14000.0 INR/Barrel

Send Inquiry

Sika FerroGard 901 IN

Application:Construction
Form:Liquid
Surface Treatment:Polished
Size:230 kgs
Product Type:BAG
Purity:High
Usage:Construction Chemical
Supply Ability:20 Per Day

Price: 32000.0 INR/Barrel

Send Inquiry

SikaPlast 4061 NS

Supply Ability:20 Per Day
Usage:SikaPlast -4061 NS a superplasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of concrete: High performance concrete Ready mix concrete Site batched concrete Pumped concrete Pre stressed concrete
Main Material:Polycarboxylate Ether
Material Grade:Dark Brown Liquid
Purity:~1.06 kg/l at 25 C
Product Type:BAG
Weight:255 Kilograms (kg)
Surface Treatment:Polished

Price: 19065.0 INR/Barrel

Send Inquiry

BRP ADHIKARY CHEMICALS PRIVATE LIMITEDGST : 19AAJCB0019N1ZJ

Ready To Mix

BRP ADHIKARY CHEMICALS PRIVATE LIMITED
GST : 19AAJCB0019N1ZJ