SikaPlast 3001 NS

Product Description

DESCRIPTION SikaPlast-3001 NS A highly effective high range water reducing agent and superplasticizer for free flowing concrete. USES SikaPlast-3001 NS a superplasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of concrete: High performance concrete Ready mix concrete Pre cast concrete Pre stressed concrete Site batched concrete CHARACTERISTICS / ADVANTAGES SikaPlast-3001 NS is a powerful superplasticiser based on advanced technology which gives the following advantages: High water reduction. Higher strength and density Improved cohesion properties Improved durability Improved water tightness APPROVALS / STANDARDS IS 9103, ASTM C494 PRODUCT INFORMATION Chemical Base Modified Polycarboxylate Packaging 255 kg HDPE carboy or Tanker supply. Appearance / Colour Light Brown Liquid Shelf Life 12 months from date of production if stored properly in undamaged unopened, original sealed packaging. Storage Conditions Store in dry conditions at temperatures between +10C and +40C. Protect from direct sunlight and frost. Density 1.09 kg/l at 25C pH-Value 6 Product Data Sheet SikaPlast-3001 NS November 2018, Version 01.01 021301011000001537 1 / 2 APPLICATION INFORMATION Recommended Dosage 0.5% to 2.0% by weight of cementitious. Higher dosage may be used if agreed by engineer and consultant Actual dosage to be finalised on the basis of site trials. Stir well before use. Compatibility SikaPlast-3001 NS may be combined with many other Sika products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cementitious materials. APPLICATION INSTRUCTIONS DISPENSING SikaPlast-3001 NS can be added into the mixing water or directly into the concrete mixer after 50 70% of the mixing water has been added. The addition of SikaPlast-3001 NS to dry aggregate or cement is not recommended. To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended. LIMITATIONS Excessive water addition or overdosing may cause bleeding or segregation. Overdosing may cause extension of initial and final setting times. If frozen and / or if precipitation has occurred, SikaPlast-3001 NS may be used after thawing slowly at room temperature and after intensive mixing. BASIS OF PRODUCT DATA All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. LOCAL RESTRICTIONS ECOLOGY, HEALTH AND SAFETY For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safetyrelated data. LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika's recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.