Sika Lastic 520 Cool Coat

2250.0 INR/Piece

Get a Price/Quote

Product Details:

Installation Type The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. The compressive strength must be a minimum of 20 N/mm2. Use of Sikament or Sika Viscocrete super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners.
Application The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. The compressive strength must be a minimum of 20 N/mm2. Use of Sikament or Sika Viscocrete super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners.
Usage Ready to use Good wear resistance High impact resistance Cost effective surface hardener Makes floor dust proof Non metallic and rust free Easy to clean Increased resistance to oils and grease Quality assured factory blending Suppresses superficial fibres in concrete
Purity Abrasion Resistance ~1.70 mm wear loss (IS:1237) Surface hardness Between 8 and 9 (Moh's scale) (IS:13630 Part 13) Compressive Strength 70 N/mm2 (IS:4031 Part 6)
Product Type BAG
Main Material Sika Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: Warehouses Factories Shopping malls Public areas Restaurants Museums Parking lots Garages and Service stations
Surface Treatment Polished
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

Sika Lastic 520 Cool Coat Price And Quantity

Minimum Order Quantity 1 Piece
Price 2250.0 INR/Piece

Sika Lastic 520 Cool Coat Product Specifications

Main Material Sika Chapdur (IN) may only be used by experienced professionals. Suitable for use in all cases where floors are subjected to severe mechanical wear and there is a need to apply special hard wearing surface coverings, such as: Warehouses Factories Shopping malls Public areas Restaurants Museums Parking lots Garages and Service stations
Installation Type The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. The compressive strength must be a minimum of 20 N/mm2. Use of Sikament or Sika Viscocrete super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners.
Surface Treatment Polished
Product Type BAG
Usage Ready to use Good wear resistance High impact resistance Cost effective surface hardener Makes floor dust proof Non metallic and rust free Easy to clean Increased resistance to oils and grease Quality assured factory blending Suppresses superficial fibres in concrete
Purity Abrasion Resistance ~1.70 mm wear loss (IS:1237) Surface hardness Between 8 and 9 (Moh's scale) (IS:13630 Part 13) Compressive Strength 70 N/mm2 (IS:4031 Part 6)
Weight 30 Kilograms (kg)
Application The concrete deliveries must be of consistent quality. A concrete slump in the range 75 to 110 mm will normally give best results. The slab must be of good quality concrete with a minimum water/cement ratio consistent with the production of a fully compacted slab. The compressive strength must be a minimum of 20 N/mm2. Use of Sikament or Sika Viscocrete super plasticisers is advised to ensure the optimum quality of concrete and where fibers are used, their optimum dispersion within the mix. Air Entrained Concrete is not a suitable substrate for the application of dry shake hardeners.

Sika Lastic 520 Cool Coat Trade Information

FOB Port KOLKATA
Payment Terms Cash in Advance (CID)
Supply Ability 20 Piece Per Day
Delivery Time 2 Days
Sample Policy Within a certain price range free samples are available
Main Domestic Market Bihar Jharkhand Odisha West Bengal East India
Certifications Abrasion Resistance ~1.70 mm wear loss (IS:1237) Surface hardness Between 8 and 9 (Moh's scale) (IS:13630 Part 13) Compressive Strength 70 N/mm2 (IS:4031 Part 6)

Product Description

Sikalastic-520 Cool Coat Fibers IN is a 1-part, acrylic,

water based, elastic, cold applied liquid membrane

that can be applied directly from the container. It contains

addition of cross-linking polymers, special glass

micro fibres, pigments and advanced antifungal additive

that provides long lasting tough waterproofing

membrane. The high solar reflective index of the

membrane provides a heat reflective surface, minimises

surface temperature of the membrane and reduces

heat ingress keeping the interior of the building

cooler and thereby increasing thermal efficiency of the

building. The Product provides a seamless, smooth

waterproof finish which is resistant to UV exposure

and has elastic properties.

USES

Sikalastic-520 Cool Coat Fibers IN is used for:

Flat and sloping fully exposed roof structures

New construction and refurbishment projects

Waterproofing and renovation of old roof tiles

Waterproofing of external walls and sunshades

Roofs with numerous details such as penetrations,

drains, roof lights and complex geometry

Exterior coating for PVC water tanks

Sikalastic-520 Cool Coat Fibers IN is used on the following

substrates:

Concrete and cementitious substrates

Brick, masonry or renders

Unglazed clay tiles

Unglazed ceramic tiles

Asbestos or lime terraced roofs

CHARACTERISTICS / ADVANTAGES

High solar reflectance index (SRI)

Minimises the surface temperature on roof and walls

Reduces energy for cooling of buildings

High adhesion to concrete, render, masonry, corrugated

asbestos, bitumen, asbestos cement sheet and

metal decks

Crack-bridging

Highly flexible and vapour permeable

Low VOC content

Resistant to permanent UV exposure

Excellent weather resistance and good service life

High resistance to chloride penetration, hence highly

suitable for saline environment

Good resistance to mould and fungus

Cold applied - requires no heat or flame

Easy application by brush or roller

PRODUCT INFORMATION

Chemical base Acrylic polymer dispersion, micro fibres and antifungal additives

Packaging 10 kg container

Storage conditions The product must be stored properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 C and +30 C. Appearance / Colour Thick viscous liquid / White or Grey Other colours on request subject to minimum order quantity. Important: Applied colours selected from colour charts will be approximate. Important: For colour matching, apply colour sample and confirm selected colour under real lighting conditions. Important: When product is exposed to direct sunlight, there may be some discolouration and colour variation, this has no influence on the function and performance of the product finish. Density ~1.35 kg/L (+30 C) Solid content by weight ~66 % TECHNICAL INFORMATION Shore A hardness ~45 (28d, +30 C) (ASTM D2240) Tensile strength ~1.5 N/mm2 (ASTM D412) Elongation at break 250 % (ASTM D412) Crack bridging ability Passes up to 3.2 mm (ASTM C1305) Tensile adhesion strength 1.5 N/mm2 (EN 1542) Tear strength 15 N/mm (ASTM D624) Solar Reflectance Index 112 (ASTM E1980) Water absorption < 20 % (ASTM D570) Water vapour transmission ~23 g/m224h (ASTM E96) Chloride ion diffusion resistance Very low (ASTM C1202) Microbiological resistance No growth (ASTM D5590) Behaviour after Artificial Weathering No crack, No blisters, No change of gloss, 500 h (ASTM D4587) SYSTEM INFORMATION System structure Layer Product Primer Sikalastic-10 Primer W Base coat Sikalastic-520 Cool Coat Fibers IN Top coat Sikalastic-520 Cool Coat Fibers IN (Optional) Clear coat Sikalastic-10 Primer W Important: Do not overcoat Sikalastic-520 Cool Coat Fibers IN with tile, concrete or others. Sikalastic-520 Cool Coat Fibers IN is an exposed system. Important: For larger application areas and high demanding applications, use a glass fabric reinforcement Sika Fabric-50 between the coats. For normal exposures, usage of Sika Fabric-50 is optional. Reinforcement (partial or total) must be used over dynamic cracks and joints. Important: For enhanced dirt pick up resistance and easy cleanability, above build up must be further coated with a thin layer of Sikalastic-10 Primer W

Tell us about your requirement

Price:

Quantity *

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Ready to Mix' category

Sika Viscocrete 2004 NS Price : 32800.0 INR/Barrel Minimum Order Quantity : 1 Application : Optimum dosage of Sika ViscoCrete 2004 NS should be determined by site trials. Recommended dosage: 0.2 2.0% by weight of cementitious. A higher dosage might be used if agreed by client or consultant.Stir well before use. Surface Treatment : Polished Product Type : Admixture Purity : ~1.12 kg/l at 25 C Weight : 255 Drams (dr) Size : 255 KG Main Material : Light Brown liquid Usage : Sika ViscoCrete 2004 NS a superplasticizer for free flowing concrete in floors, slabs, foundations, slender components with dense re inforcement, walls and columns and other structural eleme Sika ViscoCrete 2004 NS is mainly used for the following types of concrete: High performance concrete High strength concrete Ready mixed concrete Self compacting concrete Precast concrete Pre stressed concrete Pumped concrete Material Grade : ~1.12 kg/l at 25 C Installation Type : Sika ViscoCrete 2004 NS can be added into the mixing water or directly into the concrete mixer after 50 70% of the mixing water has been added. The addition of Sika ViscoCrete 2004 NS to dry aggregate or cement is not recommended. To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended Feature : 12 months from date of production if stored properly in undamaged unopened, original sealed packaging.

Send Inquiry

SikaPlast 4061 NS Price : 19065.0 INR/Barrel Minimum Order Quantity : 1 Application : SikaPlast 4061 NS a superplasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of concrete: High performance concrete Ready mix concrete Site batched concrete Pumped concrete Pre stressed concrete Surface Treatment : Polished Product Type : BAG Purity : ~1.06 kg/l at 25 C Weight : 255 Kilograms (kg) Size : 255 Kg Main Material : Polycarboxylate Ether Usage : SikaPlast 4061 NS a superplasticizer for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of concrete: High performance concrete Ready mix concrete Site batched concrete Pumped concrete Pre stressed concrete Material Grade : Dark Brown Liquid

Send Inquiry

SikaPlast 5003 NS Price : 22000.0 INR/Barrel Minimum Order Quantity : 1 Application : Recommended Dosage 0.5 % to 2.0 b. w. o. c. Optimum dosage has to be finalized through site trials. Stir well before use. Compatibility SikaPlast 5003 NS may be combined with many other Sika Products. Compatible with all types of cement and cementitious materials. Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information about specific combinations. Surface Treatment : Polished Product Type : BAG Purity : ~1.11 kg/l at 25 C Weight : 255 Kilograms (kg) Size : 255 kg Main Material : Light Brown Liquid Usage : SikaPlast 5003 NS is a powerful superplasticiser based on advanced technology which gives the following advantages: Strong water reduction, resulting in high density, high strength and reduced permeability Less sensitive against variations in aggregates and / or different cement types High efficiency even at low dosage rates Extended workability in conjunction with subsequent strength development Superior plasticising effect, resulting in improved flow, placing and compaction characteristics Material Grade : Store in dry conditions at temperatures between +10 C and +40 C. Protect from direct sunlight and frost.

Send Inquiry

Sika Separol N Oil Based Shutter Release Agent Price : 34400.0 INR/Barrel Minimum Order Quantity : 1 Application : Ready to use Good efficiency due to low viscosity Non corrosive Easy to apply Fast stripping and cleaning of formwork Extends life of formwork Ensures fair faced concrete finish which makes it ideal for architectural concretes. Reduces air bubbles which may appear on concrete surfaces Economical consumption Suitable for application to formwork used in heat treatment of precast concrete and highly heated segments (Formwork up to +70 C) All types of concrete Resistant to vibration Surface Treatment : Polished Product Type : BAG Purity : ~0,90 kg/l ( 0,05 kg/l) Weight : 230 Kilograms (kg) Size : Barrel Main Material : Wooden formwork ~15 22 m2/L Metal or plastic formwork ~31 60 m2/L Usage : Form release agent on absorbent and nonabsorbent formwork Providing a good quality aesthetic finish on cast and precast concrete Extending the life of formwork

Send Inquiry

SEND INQUIRY CALL ME FREE

BRP ADHIKARY CHEMICALS PRIVATE LIMITEDGST : 19AAJCB0019N1ZJ

Sika Lastic 520 Cool Coat

Product Details:

Sika Lastic 520 Cool Coat Price And Quantity

Sika Lastic 520 Cool Coat Product Specifications

Sika Lastic 520 Cool Coat Trade Information

Product Description

Other Products in 'Ready to Mix' category

BRP ADHIKARY CHEMICALS PRIVATE LIMITED
GST : 19AAJCB0019N1ZJ