SikaCeram 125 Easy Fix

230.0 INR/Bag

Get a Price/Quote

Product Details:

Application Bathrooms Kitchens Residential environments Terraces Wet areas Tile on tile in any of above areas
Product Type BAG
Surface Treatment Polished
Size 20
Weight 20 Kilograms (kg)
Usage TILE FIXING
Click to View more
Share Your Product:

Request to Call Back Send Inquiry

SikaCeram 125 Easy Fix Price And Quantity

Minimum Order Quantity 1 Bag
Price 230.0 INR/Bag

SikaCeram 125 Easy Fix Product Specifications

Product Type BAG
Weight 20 Kilograms (kg)
Size 20
Usage TILE FIXING
Surface Treatment Polished
Application Bathrooms Kitchens Residential environments Terraces Wet areas Tile on tile in any of above areas

SikaCeram 125 Easy Fix Trade Information

FOB Port KOLKATA
Payment Terms Cash in Advance (CID)
Supply Ability 20 Bag Per Day
Delivery Time 2 Days
Sample Available No
Sample Policy Within a certain price range free samples are available
Packaging Details 20 KG BAG
Main Domestic Market Bihar Jharkhand Odisha West Bengal East India
Certifications IS 15477:2019

Product Description

DESCRIPTION

SikaCeram-125 Easy Fix is a polymer modified, cementitious,

normal setting, self curing, easy fixing

floor and wall tile adhesive. For small, medium sized

ceramic and vitrified tiles in residential environments.

Suitable for bonding absorbent and partly absorbent

ceramic tiles to absorbent construction material substrates.

Indoor use. EN 12004: Classification C1T*,conforms

to IS 15477: 2019,Type1 Adhesive.

USES

Bonding the following types of tiles:

Vitrified

Ceramic

Earthenware

Bonding tiles for the following applications:

Balconies

Bathrooms

Kitchens

Residential environments

Terraces

Wet areas

Tile on tile in any of above areas

CHARACTERISTICS / ADVANTAGES

Layer thickness 3mm (Minimum)

Reduced vertical slip

Smooth application

Easy to use, only water to be added

Better bond than conventional cement based mor tar

Self curing

Bonding floor and wall tiles

Suitable for absorbent ceramic tiles and vitrified tiles

Typical bonding substrates: Cementitious screed,

concrete, plaster, ceramic tiles

APPROVALS / STANDARDS

Conforms to IS 15477: 2019,Type1 Adhesive

PRODUCT INFORMATION

Chemical base Portland cement, selected aggregates, water retention additives, re-dispersible

polymer

Packaging 20 kg bag and 40 kg bag

Appearance / Colour Grey or White powder

Shelf life 12 months from date of production

Storage conditions The product must be stored in original, unopened and undamaged sealed

packaging in dry conditions at temperatures between +5 C and +35 C.

IS 15477: 2019,Type1 Adhesive

C1T* according to EN 12004-1

Product declaration

1 / 4

C1T* according to ISO 13007-1

*Tensile adhesion strength test after freeze-thaw cycles not conducted due to tropical climatic conditions

SUSTAINABILITY INFORMATION

Green building Low carbon footprint

TECHNICAL INFORMATION

Tensile adhesion strength Initial / dry condition 0.5 N/mm2

After water immersion /

wet condition

0.5 N/mm2

After heat ageing 0.5 N/mm2

After > 20 minutes, open

time

0.5 N/mm2

(EN 12004-2 /

ISO 13007-2)

Slip resistance 0.5 mm (EN 12004-2 / ISO 13007-2)

SYSTEM INFORMATION

System structure For the following substrates, a primer must be used:

Substrate Primer

Calcium sulphate substrate (gypsum,

gypsum fibre boards, calcium sulphate

screed)

SikaCeram-935 Floor Leveler

Primer diluted with water in ratio

1:1

APPLICATION INFORMATION

Fresh mor tar density Grey 1.7 0.2 kg/L (+27 C)

White 1.7 0.2 kg/L (+27 C)

(EN ISO 2811-1)

Consumption Consumption is dependent on the substrate, surface profile, roughness,

size of the tiles, the joints between them and application technique (i.e.

single spreading / floating method or double spreading / buttering method).

Apply product to a test area to calculate the exact consumption for

the specific substrate conditions and proposed application.

As a guide for a single adhesive layer:

Size of tiles Bed thickness Consumption

(Grey) dry

powder

Consumption

(White) dry

powder

Small 3 mm 3.003.50 kg/m2 2.503.00 kg/m2

Medium 4 mm 4.254.75 kg/m2 3.253.75 kg/m2

Large 5 mm 5.005.50 kg/m2 4.505.00 kg/m2

Ambient air temperature +5 C min. / +45 C max.

Mixing ratio Packing Water to powder ratio

by weight

Quantity of water per

bag

20 kg, Grey 0.220.24 4.44.8 L

40 kg, Grey 0.220.24 8.89.6 L

20 kg, White 0.250.275 5.05.5 L

40 kg, White 0.250.275 1011 L

Substrate temperature +5 C min. / +45 C max.

Maturing time ~5 minutes

Pot life 90 minutes (100 g mass, +27 C)

Open time > 20 min (EN 12004-2 / ISO 13007-2)

Product Data Sheet

SikaCeram-125 Easy Fix

October 2024, Version 04.01

021710102000000634

2 / 4

Adjustability time ~30 min (+27 C)

Applied product ready for use Use Waiting time

Grouting floors / walkability 2436 hours

Grouting walls 46 hours

Water immersion ~21 days

Values determined in laboratory conditions: +23 C 2 C, R.H. 50 % 5 %.

Higher temperatures will reduce the indicated waiting time, lower temperatures

increase waiting time.

BASIS OF PRODUCT DATA

All technical data stated in this Product Data Sheet are

based on laboratory tests. Actual measured data may

vary due to circumstances beyond our control.

ECOLOGY, HEALTH AND SAFETY

User must read the most recent corresponding Safety

Data Sheets (SDS) before using any products. The SDS

provides information and advice on the safe handling,

storage and disposal of chemical products and contains

physical, ecological, toxicological and other

safety-related data.

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY / PRE-TREATMENT

Important: Do not apply on metal surfaces,

wood and old ceramic tiles outdoor.

Important: Gypsum plaster and anhydrite screed substrates

must have a maximum moisture content of 0.5

The substrate can be one of the following materials:

Cementitious screed, concrete, plaster, ceramic tiles,

cement lime mor tars, calcium sulphate screed,

gypsum fibre boards.

Cementitious substrates must be sufficiently cured

and dried (26 weeks).

All substrates must be structurally sound, able to

support the weight of the new tiling and provide a

firm and securely fixed background.

Substrates must be clean, dry, free of any loose or

friable particles, contaminants such as dust, dirt, oil,

wax polish, grease, cement laitance or efflorescence.

Use adequate mechanical preparation techniques to

remove from the substrate, all traces of any materials

that could reduce the product's adhesion to the

substrate.

Smooth surfaces must be roughened lightly to improve

adhesion.

To confirm adequate surface preparation and adhesion,

carry out a small trial before full application.

Any small surface defects and variations in level, profile,

or around exposed aggregates, prefill and level

with an additional layer of SikaCeram-125 Easy Fix

to a maximum thickness of 5 mm, applied at least 24

hours before full adhesive application.

For larger and thicker areas of substrate re-profiling

and making good, use suitable mor tars from the Sika

MonoTop or SikaCeram Floor Leveler range.

Identify cra cks in the substrate and seal appropriately

with Sikadur epoxy resins.

When laying tiles on non-absorbent or substrates

with limited absorbency, such as existing ceramic

tiles, painted surfaces etc., check these surfaces are

all sound, firm and securely bonded. Use suitable degreasing

/ descaling products to thoroughly and completely

clean the substrate.

For applications in hot climates / environments, or

on absorbent substrates, thoroughly pre-dampen the

substrate immediately before product application.

Avoid any ponding / standing water on the substrate.

Surface must not be damp to touch.

If a waterproofing layer is required under the tiles,

cement-based and acrylic-based Sika waterproofing

product / systems must be applied to the substrate

before tiling.

MIXING

Important: Avoid over-mixing to minimise air entrainment.

Requirement: Use a low speed electric single paddle

mixer (< 500 rpm) with spiral paddle for mixing.

Pour the minimum recommended quantity of clean

cold water into a clean mixing container.

Gradually add SikaCeram-125 Easy Fix powder to

the water while mixing.

Mix thoroughly for ~5 minutes until a uniformly coloured,

smooth mix is achieved. Add additional water,

if necessary, to the maximum specified amount.

Do not mix for ~5 minutes to allow mixed product to

mature.

5. Remix for ~15 seconds.

APPLICATION

Important: Apply sufficient adhesive to ensure adequate

wetting of the backs of the tiles.

Important: Coverage on the back of the tiles must be

100 %.

Important: Tiling must be carried out on freshly applied

adhesive. Exert adequate pressure to ensure 100

% complete and uniform contact with the adhesive to

achieve optimum adhesion.

Important: If a skin forms on the surface of the adhesive,

immediately remove the adhesive layer with a

trowel, discard material and apply a fresh layer of

SikaCeram-125 Easy Fix adhesive.

Important: Protect freshly applied material from freezing

conditions and rain, etc.

Important: For natural stone tiles, always carry out a

preliminary test application first.

Note: For tiles > 900 cm2 (e.g. 30 30 cm), the doublespreading

(buttering) technique is always recommen-

Product Data Sheet

SikaCeram-125 Easy Fix

October 2024, Version 04.01

021710102000000634

3 / 4

ded.

Apply sufficient adhesive to the prepared fixing surfaces

with the flat side of trowel.

Comb additional adhesive with appropriate square

notched trowel to the required bed thickness.

Wherever needed (for large tiles), back butter the

tiles for full bedding.

Place tiles into wet, sticky adhesive and use rubber

mallet to fully embed the tiles.

Adjust tiles if required. Provide support wherever

needed.

Clean off surplus adhesive from tile face and

between tile joints before the adhesive has dried.

CLEANING OF TOOLS

Clean all tools and application equipment with water

immediately after use. Hardened material can only be

mechanically removed.

LOCAL RESTRICTIONS

Note that as a result of specific local regulations the

declared data and recommended uses for this product

may vary from country to country. Consult the local

Product Data Sheet for exact product data and uses.

LEGAL NOTES

The information, and, in particular, the recommendations

relating to the application and end-use of Sika

products, are given in good faith based on Sika's current

knowledge and experience of the products when

properly stored, handled and applied under normal

conditions in accordance with Sika's recommendations.

In practice, the differences in materials, substrates

and actual site conditions are such that no warranty

in respect of merchantability or of fitness for a

particular purpose, nor any liability arising out of any

legal relationship whatsoever, can be inferred either

from this information, or from any written recommendations,

or from any other advice offered. The

user of the product must test the products suitability

for the intended application and purpose. Sika reserves

the right to change the properties of its

products. The proprietary rights of third parties must

be observed. All orders are accepted subject to our

current terms of sale and delivery. Users must always

refer to the most recent issue of the local Product

Data Sheet for the product concerned .

Tell us about your requirement

Price:

Quantity *

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Floor Hardener' category

Sika Antisol A4 Price : 14000.0 INR/Barrel Minimum Order Quantity : 1 Product Type : BAG Surface Treatment : Polished Purity : ~1.03 kg/l at 25 C Application : Sika Antisol A4 White is ready to use. Do not dilute. Stir well before use. Sika Antisol A4 White curing compound can be applied by a sprayer, brush or paint roller. For maximum beneficial effect, it should be applied immediately after disappearance of the surface water sheen following final finishing on horizontal surfaces. For vertical surfaces, apply immediately after removal of formwork. Apply single coat in two applications at right angles to each other to ensure uniform and more complete coverage. After application, the area must be protected from rain for at least 23 hours. Usage : Sika Antisol A4 White is sprayed on to newly laid concrete surfaces to form a thin film barrier against premature water loss, without disturbing the normal setting action. No need to remove Sika Antisol A4 White from concrete surface for subsequent application of acrylic water based paints, cement plasters, gypsum plaster, tile adhesives etc. We recommend to conduct compatibility test between Sika Antisol A4 White and subsequent application material before start of application of Sika Antisol A4 White. Weight : 230 Kilograms (kg) Material Grade : Sika Antisol A4 White provides the following beneficial properties to the concrete surfaces: Reduces incidence of plastic cracking Reduces shrinkage Reduces surface dusting Eliminates expensive methods of curing such as hessianwatering, etc. Main Material : Waterdispersed, acrylic copolymer

Send Inquiry

Sika Raintite I Price : 4040.0 INR/Piece Minimum Order Quantity : 1 Product Type : BAG Surface Treatment : Polished Purity : ~0.5 N/mm2 (as bonding slurry) Application : Waterproof coating Sika RainTite I : Cement =1 : 2 ~500 g/m2 per coat ~200 g/m2 per coat Waterproof brush topping Sika RainTite I : Cement : Fine Silica Sand=1 : 2 : 2 ~2 kg/m2 per mm thickness ~450 g/m2 per mm thickness Polymer modified cement mortar Sika RainTite I + adequate water : Cement : Fine Quartz Sand = 1 : 5 : 15 ~2100 kg/m3 ~50 g per mm thickness Bonding slurry Sika RainTite I : Cement = 1 : 2 ~600 g/m2 ~250 g/m2 for single coat Cement paint additive 10 % by weight of cement paint As per paint suppliers PDS ~2.5 kg per 25 kg cement paint Usage : The concrete substrate must be sound and with a minimum pull off strength of 1.0 N/mm2. The substrate must be free of all traces of contaminants, loose and friable particles, cement laitance, oils and grease, wax, curing compounds, water repellent coatings etc. The substrate must be prepared by suitable mechanical preparation techniques such as high pressure water jetting, needle guns, grinding, blast cleaning etc. High spots must be removed by grinding. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of blowholes/voids Weight : 20 Kilograms (kg) Size : 2 Kg Main Material : Acrylic copolymer and special additives

Send Inquiry

SikaRep Microconcrete 4 Price : 327.0 INR/Bag Minimum Order Quantity : 1 Product Type : BAG Surface Treatment : Polished Purity : Curing time Flexural strength 7 days 8 N/mm2 28 days 9 N/mm2 (ASTM C293) Values measured at water : powder = 0.15, curing temperature +30 C Application : SikaRep Microcrete4 is suitable for producing high performance microconcrete for deep repairs to all concrete structures such as: Highway bridges and culverts Whafts and jetties Tunnels and mines Dams and reservoirs Car parks and basements Power stations Sewerage and water treatment structures Anywhere where localised deep repair is required Anywhere additional thickness is required (column and beam jacketing, etc.) Structrural strengthening of structure by section enlargement Usage : No vibration needed Easily pumpable Easy to mix and apply Excellent flow characteristics Rapid strength development High ultimate strengths Impact resistant Noncorrosive Nontoxic Iron and chloride free Dense and nonshrink concrete created by dual stage expansion Good bonding with existing concrete Adjustable consistency by controlling the water within the recommended limit Weight : 30 Kilograms (kg) Size : 30 kg Material Grade : Portland cement, selected fillers and aggregates, special additives

Send Inquiry

Sikadur 42 HES In Price : 5350.0 INR/Piece Minimum Order Quantity : 1 Product Type : BAG Surface Treatment : Polished Purity : Modulus of elasticity in compression ~14 000 N/mm2 (+30 C) (ASTM C579) Flexural strength ~40 N/mm2 (7 days, +30 C) (EN 196) Modulus of elasticity in flexure ~14 000 N/mm2 (+30 C) (ASTM C580) Tensile strength ~20 N/mm2 (7 days, +30 C) (ASTM D638) Tensile adhesion strength ~20 N/mm2 (Slant Shear Bond Strength at 30 C,7 days) (ASTM C882) ~2 N/mm2 (PullOff Bond Strength at 30 C,7 days) (EN 1542) Heat deflection temperature +54 C (7 days, +30 C) (ASTM D648) Shrinkage Very low Coefficient of thermal expansion 1.9 105/K (ASTM D696) Water absorption ~0.05 % (ASTM D570) Usage : CONCRETE Concrete must be at least 28 days old. Substrates must be sound, clean, dry or matt damp but free of standing water. Substrates must be free of contaminants such as ice, dirt, oil, grease, coatings, laitance, efflorescence, surface treatments and loose friable material. Weight : 26.500 Kilograms (kg)

Send Inquiry

SEND INQUIRY CALL ME FREE

BRP ADHIKARY CHEMICALS PRIVATE LIMITEDGST : 19AAJCB0019N1ZJ

SikaCeram 125 Easy Fix

Product Details:

SikaCeram 125 Easy Fix Price And Quantity

SikaCeram 125 Easy Fix Product Specifications

SikaCeram 125 Easy Fix Trade Information

Product Description

Other Products in 'Floor Hardener' category

BRP ADHIKARY CHEMICALS PRIVATE LIMITED
GST : 19AAJCB0019N1ZJ